Wednesday, December 19, 2018
Configure Microsoft RMS to work with a Partner Tech CD5220

Out of the box the Partner Tech CD5220 has dip switch settings that make it incompatible with RMS, changing it to work is pretty simple.

If you look at the underside of the unit you'll see dip switch settings similar to this:


Out of the box, the dip switches are set like this:
Switch 6 =  ON
Switch 7 = ON
Switch 8 = OFF

You need to change these to this (this is how the image above shows):
Switch 6 =  ON
Switch 7 = OFF
Switch 8 = OFF

Make sure to TURN THE UNIT OFF when doing this.  When done power the unit back up.

Continue to configure RMS the same way you'd configure a Logic Controls PD3000 pole display.

We hope that's helpful - thanks!
Microsoft Dynamics Retail Management System

Home | POS Systems | Plug-In Directory | Custom DevelopmentSupport | Partners | About Us | Contact Us | Request Information

RITE - Retail Information Technology Enterprises - Experts in Retail Point of Sales Technology
Phone - St.Cloud, MN area: 320-230-2282, Minneapolis area: 612-216-1480 Chicago, IL area: 312-841-RITE (7483) Idaho/Utah: 208-994-9404
Toll free: 1-888-267-RITE (7483)
© RITE Enterprises, Inc 2006-2018 - All rights reserved